VMenedger CD-ROM 1.3

VMenedger CD-ROM - This program is designed to control the drive speed of various ATAPI devices. It can be a regular CD-ROM, as well as CD-R and CD-RW (in read mode). Recently, it is difficult to find similar devices with a data reading speed of less than 32x - 34x or more. When installing a high-quality CD in them, before reading the data, the speed of rotation of the drive is usually maximum. It's noticeable by ear, too. If the CD has a thick, uneven colorful coating, or a slight offset from the central axis of rotation (manufacturing defects, etc.), significant vibration occurs. This has a detrimental effect on the durability and quality indicators of the kinematics of the device. Very often, with a poorly manufactured CD with such vibration, the paint layer simply crumbles, polluting the mechanical components of the drive and optics. In the best case, cleaning in a service center is necessary. When using this program, you can control the speed of rotation of the drive, thereby eliminating such undesirable consequences.

Another reason for using this program may be a forced decrease in reading speed when accessing files with a small size of 1-3 KB). Especially if there are a lot of such files. When the drive speed is forcibly reduced from 32x - 20x (reduced reading speed set by the device) to 10x - 8x. At the same time, the actual access speed increases up to 2-3 times.

It should also be noted that when listening to video CDs and CDs with MP3 files, you can forcibly reduce the speed of the drive to 12x - 10x and 8x - 4x, respectively, without loss of playback quality. This significantly reduces the heating and wear of the device, as well as reduces the mechanical noise of the drive during playback.